TIC Instrument Controllers

TIC 3/6 channel Instrument Controller/ Display

 

Overview

The TIC Instrument Controller provides compact control with a large, clear graphical display, an intuitive user interface and serial communications. The supplied Windows™-based PC program provides full remote setup, control and data logging functions via the RS232 interface. 
 
Three TIC Instrument Controllers are available; the three head and six head versions can accommodate 3 or 6 active gauges. The six head capman version can accept up to three Edwards Barocel® Capacitance Manometers.

Technology

Windows™ PC Program 
The following information briefly describes the functionality of the Windows™ PC Program. 
  
Each TIC is supplied with a fully functional Windows™ based PC software interface, which replicates and adds to the TIC embedded control menus. 
  
The PC Monitor software enables TIC systems to be configured, controlled and monitored from a single PC: 
  • Control gauge functions such as degas and calibrate
  • Energize or de-energize gauges
  • Access other PC Monitor control functions
The Configuration Manager allows access in order to:  
  • Link gauge channels for pressure control of high vacuum gauges
  • Create, save, and load custom configurations
  • Lock the TIC software configuration or front panel controls
A useful data logging facility is also provided, which saves user selectable parameters to file (in a .csv format) for later analysis using suitable software. 
  
The relay interface panel allows the user to:  
  • Link relay channels to any connected gauge head
  • Configure the relay set-point levels for automatic operation based upon sensed pressure levels
  • Manually cycle the on-board set points for manual control of connected systems
 
 
 
 
Documents Download

【返回】